Moulding Plastics – a set of cyclical processes, where the material acquires the configuration of the inner mold and zatverdvaet, ensuring receipt of plastics with given voystvami. The essence of the process is that the molten plastic being plastic, which is in screw machine moves under pressure through the piston channels gating, filling the cavity with high-speed mold and then cools to form the casting. Injection molded plastic is more than a third of the total piece of polymeric materials, and more than half of the range of equipment used in processing of polymers designed for injection molding pressure. Casting plastic under pressure is the most productive way of manufacturing thin-walled parts with complex shapes from thermoplastic, so ideally suited to mass production, an important requirement which is an exact match sizes. With mass production must take into account the ability to automate processes, as well as take into account nalichieoborudovaniya, staff qualifications etc. Casting plastic of the highest quality possible, thanks to the one used the most modern equipment, which embodies the most advanced ideas of experts, as well as the only raw materials of acceptable quality. This gives basis with full responsibility that the work is for those who cherish quality. Of casting is always preceded by the design phase of product design and the forming tools (molds), and also worked through the design details on the technology of plastic injection molds izgotovleniya.Konstruktsiya should have radii of casting, casting biases, the same wall thickness. Dimensional accuracy and surface roughness details shall be appropriate for casting.